BRAND NEW OEM HITACHI Mass Air Flow Sensor. (see specific application data bellow). With Fuel Injected 2389 CC 4 Cylinder Engines, KA24DE.(with Fuel Injected 2389 CC 4 Cylinder Engines, KA24DE). MFG Part #: AFH55M-12, New OEM Hitachi Sensor. These are GENUINE HITACHI OEM PARTS , made in Japan. It's the same part that has lasted all those years since your truck was new. The number directly below the "AFH55M-12" part number designation is a production control number only. It is not part of the actual part number. These production control numbers are obscured. They call their part "OEM Replacement" or refer to their part as being an "AFH55M-12" to make it sound legitimate. Notice how their listings do NOT show a detailed close-up photo of the sensor? If it is not stamped with the Hitachi brand name & Nissan logo, it is not a genuine OEM part! If you're tempted by the ridiculous low prices of the.
They are notorious for being defective right out of the box and do not last. You may have to replace several before getting one that works at all. They are not individually boxed for resale. PLEASE READ THIS BEFORE ORDERING. Your old sensor may not need replacing or may not be the problem.If you are not 100% sure this is the part needed to fix your vehicle's problem... PLEASE DO NOT ORDER IT. MAF sensors are often just dirty and/or frequently mis-diagnosed. Try cleaning your old sensor with. S Mass Air Flow Sensor Cleaner, or comparable product, before ordering a new sensor from anyone. Most auto parts stores stock this cleaner. Dirt builds up on the delicate sensor wires which results in faulty readings being sent to your engine management computer, typically resulting in rough idle and stumbling accelleration symptoms. However, other engine management components could also be the. The "check engine" light coming on is a generic alert, indicating a problem. It could be something as simple a leaky vacuum hose or even a loose gas cap. It could also be a bad. /BARO Pressure Switch Solenoid Valve, TPS/Throttle Position Switch, O2 Sensor, etc, etc. The MAF sensor can be checked by tests with a multi-meter. Its a good way to determine if the sensor itself is good.
I would not sell you a part as Brand New if someone else installed it, even briefly. That makes it a USED part. Please have your vehicle diagnosed by a qualified technician using the proper test equipment. Technician using OBD Test Equipment stating that the Mass Air Flow Sensor is, in fact, Defective.
It must include the Code Readings of the Diagnostic Test performed on the vehicle. Are your fuel injectors really BRAND. We are also the exclusive online distributor for Xtreme High Performance and Xtreme Upgrade product line of Fuel Injectors. The Factory Remanufactured Injectors we sell are professionally remanufactured at the 2.
Largest Fuel Injector Remanufacturing Production facility in. Using state-of-the-art calibrated equipment to meet all original electrical and fuel flow specifications. This includes a final Spray Pattern Test performed with an industry approved, non toxic, fuel injector Test Solvent... It is not gasoline and it does not indicate that the injectors are used.How can you sell BRAND. We get asked this question often. Having been in the Auto Parts business for over 40 years, Ive worked for Warehouse Distributors, owned & operated Retail Auto Parts Stores, served in a Regional and National Management capacity for three Major Auto Parts Manufacturers and also pioneered an Internet Auto Parts web site in 1998. Injectors and other fuel system components directly from the OE manufacturers here in the. Parts and package them in their Remanufactured boxes. This is done out of necessity when serviceable cores (used parts) are not readily available to maintain a good order fill percentage for their repeat wholesale customers. In other words, you cant remanufacture a part you dont have. Additionally, some OEM fuel injectors simply can not be remanufactured with any degree of reliability due to inherent design flaws. Thousands of part numbers are needed to cover the entire fuel injector universe but not all are available at our targeted low acquisition cost. Please note that we absolutely. How do I know that these parts are correct for my vehicle? NexCat is a professional & expensive Subscription Only electronic auto parts catalog and informational database service used nationwide by major auto parts manufacturers, wholesalers and retailers. Please note that all car companies are notorious for superseding and duplicating OE parts with new numbers from year to year when in fact, the parts are carry-overs, identical and completely interchangeable. Also note that the number stamped in or printed on a fuel injector is NOT necessarily the OE part number. It can also be a component or casting/molding number. Cosmetic (color) changes & minor modifications are also common over a parts application & life cycle, resulting in multiple part numbers that are identical specs.
We also offer some fuel injectors that may look slightly different than your OE parts but are the same electrical & flow specs and critical dimensions. Those are noted as such in their listings.Dont just assume that because the injector looks different that it will not work. Example: we offer Brand New Denso, Bosch and Siemens-Deka injectors for certain GM, Ford and Chrysler vehicles that are truly an upgrade in quality compared to the OEM injectors and may look a bit different.
The bottom line is that if we list a part as fitting your particular vehicle, it will fit and perform as good as or better than the parts you remove. After 20 + years specializing in the Fuel Injection business, with large wholesale customers all around the world, perfection and accuracy is a necessity. What is the difference in a Brand New OEM part vs.
A Brand New Aftermarket part? OEM parts are made by several different fuel injector manufacturers, contracted by the car companies to supply them.
Most, but not all, OE injectors are now made by. Bosch, Siemens-Deka, JECS, Denso and a few others.
Aftermarket injectors are also manufactured by several companies such as Standard Motor Products, BWD, Python and others. Not all aftermarket parts are equal in quality or fit. Some companies, such as Standard Motor Products, manufacture & supply OEM injectors for some vehicles as well as manufacture a complete product line of injectors for other vehicles. An OEM supplier and an Aftermarket company.
I know its confusing but thats the way this crazy business works! Ford, GM, Chrysler and other car companies DO NOT make most of the parts for their vehicles. Generally they design, style and manufacture the cars bodies & engines and contract out the fuel & electrical components as well as electronics & accessories, rubber & plastic molded trim, windshield wiper systems, lighting components, bearings, exhaust systems, suspension parts, wheels, upholstery, and on and on all to their design specifications. Many years ago the major car companies wholly owned most of their sub-supplier manufacturing plants such as GMs Divisions: AC (filters & spark plugs), Delco Remy (ignition, starters, alternators & electrical). (fuel system parts), Packard (wire & cable) ND/Hyatt (bearings) and Morraine (brake systems), etc.
But, thats all changed now. Cars are truly World Cars assembled with parts and components manufactured by independent suppliers all around the globe. As previously mentioned, I do not sell any aftermarket parts that are less than OE Quality parts. Absolutely NO cheap Chinese knock-off junk!In fact they no longer make any parts. It is now an independent marketing company, a name on a box only, but is still associated with GM. However, the injector inside a Delco box will be a part made by Bosch, Siemens-Deka. Do not attempt to install fuel injectors if you are not fully capable of the job. These are high-pressure fuel systems and the installation requires skill and technique to avoid damage to the injector o-rings. Most of our buyers are advanced Do-it-yourselfers or qualified Professional Installers or they have a friend whose capable of doing the install for them. Check with the Service Manager or Owner of the repair shop you intend to use and tell them that you intend to supply the parts. Taking your own parts into a Car Dealer or Professional Installer.
According to Professional Installers taking your own parts into a Car Dealer or Independent Shop is like taking two eggs, four strips of bacon and two pieces of toast into your local restaurant and expecting the meal for next to nothing because you supplied the food. It is considered unethical and is in fact far less profitable for the trade Professionals.
They typically make as much profit from the sale of repair parts as they do from the labor, depending on the job, of course. A 50% + profit margin on parts sales is the norm in the auto repair industry and should be expected. Most Car Dealers in metropolitan areas are owned by large corporations or dealer groups who likely own several car brand dealerships. They are certainly not dishonest but they couldnt care less about saving you a penny! Their service bays contribute much of the dealers overall profit.
And most independent repair shops are also honest, hard working small business owners. But theres a small percentage of Professional Installers that may resort to less than honest tactics if asked to install parts furnished by the customer. That being the case, if you plan to supply your own parts and have them installed by a commercial repair shop. I highly suggest that you tell them in advance, when getting an estimate of repairs, and get all the details in writing. Many shops simply will not install parts supplied by the customer for various reasons, some legitimate, some not.Those few less than honest shops may agree to install your parts BUT. Tell you that the parts you supplied are NOT the right parts or that theyre inferior.
Quality and refuse to install them. Your car is in the shop. This leaves you with a. Overcharge you for labor (to cover the lost profit on parts sales).
Install your parts but do so improperly sabotage? Leaving you in a very bad.
Situation and in the process teaching you a lesson. The exception would be previously modified vehicles or possible engine swap situations... Which are beyond our crystal balls capabilities to devine.
The item "BRAND NEW GENUINE HITACHI OEM Mass Air Flow Sensor, Nissan FRONTIER 1998-2004" is in sale since Sunday, April 5, 2015. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Air Intake & Fuel Sensors".
The seller is "fuel-injectors" and is located in Fairview Heights, Illinois. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, New Zealand, Switzerland, Norway, Ukraine, Croatia, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bermuda, Bolivia, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Cayman islands, Liechtenstein, Luxembourg, Monaco, Martinique, Nicaragua, Paraguay, Uruguay.